How Professionals Repair Curb Rash, And Why It's So Expensive

Sticker stupor and bicycle repair quotes go mitt-in-hand. It'due south no wonder, because wheel repairs can cost as much equally $150 per wheel. That'southward the same cost as some brand new wheels.

Only the more than yous call back about it, the more information technology makes sense why wheel repair professionals charge so much money. We'll explicate why in this article.

Just Repairing A Bicycle Is So Like shooting fish in a barrel!

Damaged tesla wheel

Repairing a wheel seems like an easy and straightforward process. DIY adjourn rash repairs tin atomic number 82 to proficient results. Merely there'southward no substitute for professional person repair. You're not only paying for the professional's time. You're also paying for their years – or fifty-fifty decades – of grooming and experience.

In that location'south an art and science to wheel repair. You can larn the science in an hour. Simply it'll accept a lifetime to learn the fine art. A skillful repair person can make a heavily damaged wheel look new. That's considering they've repaired hundreds or thousands of wheels. Do makes perfect.

So if y'all inquire us, the rates professionals accuse are worth every penny.

Professionals use one of the following two methods:

  1. Refinishing the wheel
  2. The body shop method

Permit's talk about each method.

The Refinishing Procedure

Refinishing

Refinishing the wheel is an platonic solution when there's minor damage. Here's a general overview of the process:

  1. Make clean the damaged area.
  2. Comprehend the tire and the valve stem (if near the damaged area).
  3. Sand out the scratches and jagged edges with fibroid sandpaper.
  4. Cover the scratched area(s) with Bondo putty.
  5. Gently sand the putty until smooth.
  6. Scuff about half dozen inches around the damaged surface area with a scuff pad until completely smoothen.
  7. Spray three or four coats of primer on the bike.
  8. Spray a couple of coats of paint on the bicycle. Sand between coats. Let dry out.
  9. Spray two lite coats of clear coat over the pigment.

While this project is something yous could do at home, it rarely ends upward looking good. Information technology takes some do for good results. The putty may not come out as smooth as you wanted, for instance. The paint job may not look skilful, either. A professional person will brand your wheels look perfect.

The Body Shop Method

Some professionals use a body store type method. This method involves media blasting the cycle to remove the paint before applying epoxy putty, primer and paint to the wheel. This method brings great results. It's a bully way to remove all the paint and rust from the wheels. You would need a agglomeration of tools, including:

  • Air compressor
  • Air hose
  • Sandblasting gun
  • Sand
  • Goggles
  • Gloves

Rather than invest in all these tools and risk getting results that don't await cracking, hire a professional. Good professionals already accept all these tools. They as well take the expertise to make your wheels look flawless.

Protecting Your Repaired Wheels

Tesla protection6

A professional person wheel repair job is a great investment, then of course yous would want to protect information technology. There's a adept take chances your wheels volition get scraped up once again. The best manner to protect your wheels from future damage is to get rim protectors.

RimSavers is a leading brand for rim protectors. RimSavers are lightweight and durable strips of proprietary fabric that you can apply effectually your rims. They serve every bit the first line as defence against curbs and other obstacles on the road. Bank check out RimSavers and see if they're an ideal solution for you!