How To Repair Chipped Laminate

Download Article

Download Article

Whether your laminate floor has small chips and scratches or water-damaged boards, repairing information technology is a project you can practise yourself with the right tools and technique. To fix small-scale damage, all you lot need is a laminate floor repair kit with putty to prepare big chips or a floor repair marker to hide small-scale scratches.^[ane] To replace a lath, remove the surrounding boards or cut out the damaged board before laying a new one in place.

1. 1

   Clean the damaged surface area to remove any dirt from the chip or scratch. ^[2] Wipe the damaged function of the flooring with a clean, damp cloth. Let the floor dry completely before y'all proceed.^[three]

   • This method works for pocket-size chips and scratches that can be repaired with putty or a marker specifically fabricated to repair laminate floor.^[4] For instance, if you drib a knife and it leaves a minor cut in the floor, you can hands repair the damage with a laminate floor repair kit.

2. 2

   Buy a laminate floor repair kit that closely matches the colour of your floor. ^[v] Go laminate flooring repair putty for larger chip repairs or a floor repair marking for smaller scratches. Take an extra piece of flooring with y'all to the habitation improvement shop, if you accept one, to find the closest color.^{[half dozen]}

   • You can mix multiple colors of putty together to go a matching color if you tin't find i close enough.

   Tip: If you don't have a spare board to take shopping to color match, then have a picture on your telephone of the damaged surface area and use it as a reference to find the closest colour or colors.

   Advertizing

3. three

   Disguise small scratches with a floor repair marker. Accept off the cap of the marker and carefully color in the scratches. Allow the mark dry for thirty minutes to one 60 minutes.^[7]

   • Add together more coats of the marker subsequently it dries if the scratch is still visible.

4. 4

   Fill in large chips using putty. ^[8] Scoop out a bit of putty on a putty knife and spread it into the chipped area. Use the putty knife to smooth it out so it's level with the rest of the board, then permit information technology dry for 1 hour.^[9]

   • If the chip is particularly deep, then employ several sparse coats of the putty until it is even with the flooring.

5. 5

   Wipe around the expanse with a make clean, dry cloth to remove extra mark or putty. Carefully wipe around the repaired area to remove any marker or filler that got on the undamaged flooring. If you used putty, be sure to do this before it dries.^[10]

   • Use a cleaning solvent designed for laminate flooring if you need something stronger.

   Advertisement

1. 1

   Remove whatsoever baseboards, thresholds, or molding from effectually the area. Start at the side closest to the damaged lath or boards. Carefully pry abroad baseboards and molding from the wall and pry thresholds upwardly from any doorways with a pry bar.^{[11] [12]}

   • This method works when the damaged boards are shut enough to the edge of the floor that information technology is possible to remove a small number of surrounding boards to get to the damaged boards and replace them.
   • Attempt your best not to damage any of the pieces that you pry away so that you tin supercede them afterward.

   Tip: If you don't already take a replacement lath, then you can remove the damaged board first and have it with you to a home comeback centre or flooring supply store to assistance you notice a matching one.

2. 2

   Elevator out the boards starting with the ones closest to the edge. Insert a pry bar nether the boards at their seams and printing down on the end of it like a lever to pop the joints loose. Work from the edge where you removed baseboards and molding in towards the site of the damage until you lot can remove the damaged boards.^[13]

   • Set aside the boards that are nonetheless good, in the society you lot removed them, so that you tin supervene upon them later.

3. 3

   Supplant the damaged board with a new one. Line upward the natural language and groove of the new board the same style as those of the board you removed were lined up. Snap the new piece into position.^{[14] [fifteen]}

   • Salve the damaged board and so that you lot can use it for future repairs. For example, if you need to match the colour to repair scratches and chips, you can take it with you to the dwelling comeback store when you go looking for the repair kit.

4. 4

   Return all the boards y'all removed to their places. Piece of work in reverse social club every bit when y'all removed them, starting with the boards that surroundings the replacement board. Line upwards the tongues and grooves, then slide or gently tap them back into place with a hammer if there is a lot of friction.^{[16] [17]}

   • If you use a hammer to tap any boards into place, utilize the damaged board you removed as a buffer between the hammer and the good boards to prevent damaging them.

5. 5

   Tack whatever baseboards, molding, or thresholds back in identify. Line up the baseboards, molding, and thresholds in the same social club you removed them to reinstall them effectually the edges of the floor. Gently tack them back into place with baseboard nails and a hammer using the same nails and holes as before.^[18]

   • Use new baseboard nails if any of them got damaged when you lot pried them out earlier on.

   Ad

1. i

   Draw a cut line in from each corner of the lath and a rectangle in the middle. Mark a ane.5 in (3.8 cm) line forth a straight edge with a pen or pencil in from each corner of the board diagonally towards the center. Connect the inner ends of the lines with direct lines to brand a rectangle that you tin can cut out from the center of the board.^[19]

   • This method works to supplant a unmarried damaged board in the middle of your laminate flooring, where it would be too hard to replace by removing surrounding boards starting from an edge.

2. two

   Drill a relief pigsty at the ends of each relief cut line. Use a ⁱⁱⁱ⁄₈  in (0.95 cm) drill bit to brand a relief hole at the inner ends of the lines you marked for the cut lines. Make another fix of holes ⁱ⁄₄  in (0.64 cm) in from the outer ends of the relief lines.

   • Make 8 relief holes in total so that yous can cut in two phases—one to remove the eye section and one to remove the sides.

3. 3

   Cutting out the center of the board with a round saw. Set the depth of the saw a bit deeper than the depth of the flooring. Lift the blade guard and plunge the saw into the board, starting at i of the inner relief holes. Cut from hole to pigsty in a rectangular blueprint to connect the inner section of relief holes you made and remove the eye section.^[20]

   • Yous will be left with the edges of the damaged lath all the same connected to the good boards around them.

   Tip: If you don't already take a replacement board, then you tin can take this center cutout with yous to a home comeback center or flooring supply store and buy a matching board.

4. four

   Cut from the center to the outside of the relief holes. Cut with your circular saw from the middle diagonally out along the remaining cutting lines. Stop when you accomplish the relief holes.^[21]

   • This will separate the remaining edges of the board at the corners so y'all can remove them.

5. 5

   Remove the border pieces from the surrounding boards. Pry up each side where it is continued to a surrounding lath with your hands or pliers if they are stuck. Discard these pieces.^[22]

   • If in that location is whatsoever glue on the tongues of surrounding boards, then scrape information technology off with a flathead screwdriver earlier installing the replacement lath.

6. half-dozen

   Remove the grooves from your replacement board. Your replacement board will take two tongues and 2 grooves. Advisedly cut off the tongues and bottom lips of the grooves with a utility knife then that you will be able to drib the new lath into place.^[23]

   • To cut off the bottom lips of the grooves, sick the blade of the knife inside the grooves and cut them off from the inside.
   • Make several passes with the utility knife to score the parts you are cutting off, then snap them off with pliers.

7. seven

   Apply floor gum to the edges of the replacement board. Put a bead of floor glue forth the edges where y'all cut off the tongues and underneath the acme one-half of the grooves where y'all cutting off the bottom lips.^[24]

   • You tin go flooring glue at a home comeback middle or flooring store if y'all don't accept any.

8. 8

   Fit the board into place. Match the top half of the grooves on your new lath with the tongues on the surrounding boards. The board will now autumn into place because you removed the tongues from the new lath.^[25]

   • If the lath is non plumbing equipment right, then use your utility knife to shave off whatsoever rough parts until it drops nicely into identify.

9. 9

   Utilise a damp cloth to remove whatsoever excess glue. Wipe abroad any mucilage that squeezes out of the seams. Use a damp cloth so that yous don't spread it effectually on the surrounding boards.^[26]

   • Keep the cloth handy then you lot can wipe again after you weigh downward the board if any more than gum squeezes out.

10. 10

    Weigh down the repaired area for 24 hours. Stack some heavy books or another heavy object on top of the newly-fitted lath to help the seams adhere together. Continue the weight on the board for 24 hours to ensure the glue is completely dry.^[27]

    • Check if any more than glue squeezed out of the seams after you placed weight on the lath, and wipe information technology abroad with a clammy material.
    • If you use something that could scratch the laminate, similar a brick, identify a towel underneath to protect it.

    Advertisement

Add New Question

• Question

  I've heard hardwood flooring is difficult to install sometimes. What makes information technology difficult?

  

  Mitchell Newman is the Principal at Habitar Design and its sister company Stratagem Construction in Chicago, Illinois. He has 20 years of experience in construction, interior design and existent estate development.

  

  Construction Professional person

  Expert Answer

  Information technology isn't always super hard, but information technology can be. When y'all do hardwood floor, you have to too recall about the base around the flooring. So very oft you accept to take the base of operations up, the shoe needs to come off, when you do hardwood flooring, yous accept to also think well-nigh the base of operations shoe and the base effectually the flooring. And then, very often you have to take the base of operations upward, and you have to take the base shoe off. If you're floating a floor similar yous would with a laminate floor, you wouldn't take it right to the wall, you lot would take it most a quarter of an inch off of the wall. And then, you would put the base over it. The whole process can just get kind of convoluted depending on how you need to deal with the base.

• Question

  How much will it price to have a contractor replace part of my flooring?

  

  Mitchell Newman is the Primary at Habitar Design and its sister company Stratagem Structure in Chicago, Illinois. He has 20 years of experience in structure, interior design and real manor development.

  

  Structure Professional

  Expert Reply

  It really depends on the fabric and the contractor. And so, some laminate floor is actually cheap; it tin can cost as little as 80 cents a foursquare. The nicer stuff can run you $2.00-3.00 per foursquare foot, merely and so there's the installation cost. That can run anywhere from $1.75-4.00 a foursquare pes. And then, on top of that, information technology depends on the shape of the floor and how much space you're roofing. Even and so, in that location's nonetheless going to be the visit charge for the contractor, so the price can end up varying quite dramatically.

• Question

  How do I repair bigger gouges?

  

  Kevin Schlosser is a Dwelling Improvement Specialist and the Owner of Habitation Tech Handyman Ltd. With over twenty years of experience, Kevin specializes in age-in-place installations, floor, roofing, and general remodeling handyman services. Kevin holds a blend of construction and in-home technology-related certifications including NAHB Certified Age-in-Place Specialist, CEDIA membership and certifications, and a Certification from the Clan of Certified Handyman Professionals. As well, he is in training to receive certifications in Construction, Project Management, and other CEDIA qualified system integrator certifications. He is fully-insured in the country of Colorado.

  

  Home Comeback Specialist

  Expert Reply

  If information technology's quite a big gouge, then sometimes replacing the lath is required. You'll have to disassemble the floor from one end of the room towards wherever the damaged piece is, replace that piece, then put the flooring back together the way it was.

• Question

  Can you remove scratches from laminate flooring?

  

  Jon Gholian is a Cleaning Specialist and the Founder of Cleany, a home and office cleaning concierge service based in New York City, New Bailiwick of jersey & Miami. Cleany specializes in providing quality cleaning and handyman services to all their customers. All Cleany employees are insured, bonded, and professionally trained. Cleany has been featured in the New York Times, Bravo & Redfin.

  

  Cleaning Specialist

  Expert Respond

  It can be difficult to keep a laminate surface clean and gratis of scratches, but in that location are a few things you can try. Commencement, effort baking soda, as it is an abrasive enough substance to remove dark marks and buff out scratches naturally. You can too try using laminate paste or filler. To do this, find a paste color that matches your laminate, employ information technology to the scratches, use a putty knife to smooth out each layer, and permit a minimum of 24 hours to dry.

• Question

  How exercise I repair spots that are buckling on a laminate floor?

  

  The flooring oftentimes expands with weather conditions and buckles if there is not a gap under the baseboard to allow for flooring expansion. Remove baseboards near the floor buckling area and ensure there is a gap betwixt the wall and flooring. If non, trim the flooring to have a 1/4" gap between flooring and the wall. When you reinstall the baseboard, it volition encompass the gap.

• Question

  How do I cover or repair spots from booze or bleach spots?

  

  Yous may be able to purchase a crayon-like marking pencil of a matching color wherever you bought the flooring. It's made for hiding such flaws.

• Question

  How exercise I repair a section of floor where there are gaps between boards?

  

  There are blocks and pull bars available for pounding out gaps. Become them anywhere that sells laminate flooring.

• Question

  How do I go black marks off of laminate flooring?

  

  Toluene. It volition erase black scuff marks, even the deep appliance marks when practical as directed on any laminate floor, and works bang-up on vinyl window frames, vinyl shutters, and siding. Find it at any hardware store. Brand certain you lot follow the directions and wear proper protection (rubber glasses and gloves, etc.) and keep away from any ignition source. Open a window for proficient ventilation. Just like any other solvent, use common sense.

• Question

  What is tongue and groove flooring?

  

  Information technology consists of planks of woods or laminate that feature a groove (or furrow) on one edge and a tongue (or tab) on the other edge. The tongue of one plank fits into the groove of an adjacent plank to form a flat and stable surface.

• Question

  How do I remove pet scratch marks from laminate flooring?

  

  Same manner as scratches - use putty for deep scratches and a colour on top. Depending on the scratches, some can but be colored with a wax crayon-type kit for laminate floors, and deeper ones use other kits that fill up scratches.

See more answers

Ask a Question

200 characters left

Include your electronic mail address to go a message when this question is answered.

Submit

Advertisement

Video

Things You'll Need

• Laminate repair kit
• Damp cloth
• Dry out cloth
• Putty knife

• Replacement laminate floor lath
• Pry bar
• Hammer
• Baseboard nails

• Drill
• Circular saw
• Replacement laminate floor lath
• Utility knife
• Flathead screwdriver
• Floor glue
• Pen or pencil
• Straight edge
• Damp material

About This Article

Article Summary X

Laminate flooring is attractive and easy to install, but it can get scuffed, chipped, or h2o-damaged over time. If you need to prepare minor scratches or chips, purchase a laminate floor repair kit that matches the color of your floor. You'll need to make clean the area effectually the scratch or flake, then fill up in the area with the putty or crayon that comes with the kit. For more than serious repairs near the edges of the flooring, you'll need to remove the baseboards or molding so you lot tin can lift out the boards closest to the wall. When you reach the damaged board, take it out and put a replacement lath in. Replace the other boards and any baseboards or molding you lot removed. Read on to acquire how to repair damaged boards in the eye of your floor!

Did this summary help y'all?

Cheers to all authors for creating a folio that has been read 391,072 times.

Did this article aid yous?

Source: https://www.wikihow.com/Repair-Laminate-Flooring

Posted by: carsonveackell.blogspot.com

Share this post